Hardwood, LVP, laminate & tile — level subfloors, flawless finish
New floors change a whole home. We handle hardwood, luxury vinyl plank, laminate, tile and refinishing — with clean prep, level subfloors and proper moisture control, so the finish looks right and lasts for years.
A floor is only as good as what's under it. Most flooring problems in Seattle homes — squeaks, gaps, cupping, lifting planks — come from an uneven subfloor, skipped moisture control, or a rushed installation, not the material itself.
We start with the prep most crews skip: leveling and repairing the subfloor, checking for moisture, and using the right underlayment for each room. Then we install hardwood, LVP, laminate or tile cleanly, with tight seams and proper transitions — so the floor stays flat, quiet and beautiful for the long run.
From solid hardwood to waterproof vinyl and custom tile, here's the range of flooring work we take on across Seattle.
Solid and engineered hardwood installed with tight seams and proper acclimation — a warm, timeless floor that adds real value to a Seattle home.
Waterproof, durable and pet- and kid-friendly — ideal for kitchens, baths, basements and busy households that want the wood look without the worry.
A budget-friendly, scratch-resistant floor that installs fast and holds up to daily wear — a smart choice for bedrooms, hallways and rentals.
Porcelain, ceramic and natural stone tile set on a proper substrate — with waterproofing for wet areas and heated-floor options where you want them.
Bring tired hardwood back to life — sanding, staining and resealing existing floors instead of replacing them, for a fraction of the cost.
Leveling, repair and moisture control done before a single plank goes down — the invisible groundwork that keeps a floor flat and quiet.
Tell us the rooms and how they're used, and we'll walk you through the best material and finish — no pressure, no vague estimates.
Flooring is priced per square foot, installed, and varies with the material and how much subfloor prep the room needs. These ranges are a realistic starting point for Seattle — you'll always get a fixed-price written estimate first.
⚠ Estimated ranges — confirm
| Flooring type | Installed range | Best for |
|---|---|---|
| Laminate | $5–$9 / sq ft | Bedrooms, hallways and rentals — fast install, scratch-resistant, budget-friendly. |
| Luxury Vinyl Plank | $6–$12 / sq ft | Kitchens, baths and basements — fully waterproof, durable, low-maintenance. |
| Tile | $12–$25 / sq ft | Bathrooms, entries and wet areas — waterproof, heated-floor ready. |
| Hardwood (install or refinish) | $8–$18 / sq ft | Living areas and whole-home — timeless look, adds resale value; refinishing costs less than replacement. |
A look at some of the floors we've installed and refinished across Seattle, Bellevue, Kirkland and beyond.
From worn, scratched and dated to clean, level and built to last. Drag the handle to compare.
Walkthroughs of finished floors and a few timelapses from the job site.
Tell us the rooms, the traffic and your budget, and we'll help you narrow down the right material and finish.
We measure the space, check the subfloor and moisture, and bring samples so you can see the color and texture in your own light.
You get a fixed per-square-foot price with prep included — no fluff, no surprises, the number you approve is what you pay.
We level and prep the subfloor, then install cleanly — tight seams, proper transitions, and the space left tidy each day.
We review the floor with you, handle any last details, and leave you with a level, quiet, beautiful result.
Clear, written estimates
Level subfloors & clean prep
Daily site check-ins
5+ years in Seattle
Licensed & insured
Wide material selection
We did a bathroom and fireplace remodel with Andrei and his team. The results of both projects are exceeding our expectations! It took us quite a bit of time to come up with the final design and Andrei was very patient and helpful
Read more
Andre, did a great job on installing the backsplash tiling for our kitchen! We are very happy with his work, pricing, and work ethic! The job was done in a timely manner and to our satisfaction! I would highly recommend Andre! We will certainly call him for other future work we are planning!
Read more
Good work, the bathroom looks great. I wish I had taken some before, for comparison. Thank you Andrei and Igor.
Read more
Outstanding service at a very fair price. Plus, they're fast! Highly recommend and I look forward to working with them in the future. They remodeled 3 of our bathrooms in record time, as well as all of our trim and baseboards + painted the entire house. They're a one-stop shop for all things home renovation.
Read more
We recently had our floors reinstalled and Andrew did an outstanding job! He is very knowledgeable, fast, very accurate, the attention to details is top notch. He was flexible when we needed it and just The BEST!!! We're beyond happy with
Read moreThe questions we hear most about new floors — materials, timelines, moving furniture, and more.
It depends on the room. Waterproof LVP is a favorite for kitchens, baths and basements; hardwood suits living areas and adds resale value; tile is best for wet areas. We'll match the material to how each room is used.
Sometimes — it depends on the existing surface and its condition. We check the subfloor and moisture first; where it makes sense we install over it, but we never cover up a problem that will telegraph through the new floor.
Most single rooms are done in 1–2 days; a whole main floor typically runs several days depending on square footage, subfloor prep and whether we're refinishing hardwood, which needs drying time between coats.
Yes, we can move and protect furniture as part of the job. We'll confirm what's included in your estimate so there are no surprises on the day.
Usually, yes. If your existing hardwood is structurally sound, sanding and refinishing costs a fraction of a full replacement and can make old floors look brand new.
It comes down to prep: we level and secure the subfloor, control for moisture, and let materials acclimate before installing. That groundwork is what keeps a floor flat and quiet for years.
